-Moto-Treks
Tune done and again WOW! I can't believe what a difference this filter makes. The 990 has all sorts of power from 3k to redline. Just putting the CPR on made a huge difference in power and the modifications Nels made to the map was another big boost.
-Chris Vigil RC8
Huge gains everywhere especially where you ride it. Smooth throttle, lots of mid and top and no "Chugging or coughing" out of tight corners. Very happy with the results.
-Sergey, Russia
"Your intake system is the best on the market for KTM. With your intake system my bike is like a "low flying aircraft" now!
-Viking @ SuperDuke.net
"Very impressed with the Rottweiler box. Quality build and well priced. I was a bit dubious but there we have it, gives good gains.
1st run with mapping still set from Pod filters
= 119.85rwbhp/ 74.54 lbft torque
Final run after a few tweaks on the map
= 125.28rwbhp/ 77.89 lbft torque
-Stephane, France
"Air filter works well, very well, even better than the other aftermarket filter I had before"
-Mick, Australia
My father in law picked the bike up this morning and rang especially to say he would not have believed changing to the Rottweiler Intake System could make such an improvement, smoother on and off the throttle, less popping and farting on the over run and a very noticeable increase in power. The installers said the other filters looked a little more flash, but they are certian that the CPR FAB Rottweiler outperforms the other ones they installed before on other bikes.
-Louis Jutras
Chris.
By the way, huge gains with the ‘full’ RAM Air Rottweiler intake installed on the 2012 KTM RC8R. I gained 8 mph on the straight at Fontana with the full RAM Air kit!
SAS Block Off Plates Stage 1 (Plates only) - 29.95
(19.95 if combined with intake purchase - choose option at intake checkout)
Removing the SAS system does 3 things. Dumps over 2 pounds off your bike, cleans up the look of your engine compartment and reduces backfiring. Not to mention get's rid of alot of junk in your trunk. Highly recommended with the addition of our filter system. Our block off plates are free of fancy machining that only adds unnecessary expense and most customers don't want anyway.
KTM Airbox
Rottweiler Performance by CPR Fabrications • 1021 W. 18th St. Costa Mesa CA, 92627 Phone 949-412-1971
SAS Block Off Plates
Fits ALL KTM Big Twins. Rottweiler's SAS Block Off plates are CNC machined from billet 6061 aluminum, type II anodized black and engraved one at a time with the 'R" logo. These tough looking plates look extremely clean on the side of your engine and proudly exclaim 'Quality Parts Found Here!' (See SAS Stage 2 kit for FI light killer dongles and stock airbox plugs and Stage 3 kits for additional evap can removal hose kit)
SAS Kit Stage 2 - 69.95
(59.95 if combined with intake purchase - choose option at intake checkout)
Fits ALL KTM big twins. The easiest option to completely remove your SAS system and stop the FI light from coming on when you remove the SAS valve system completely. The SAS Stage 2 kit contains 2 Rottweiler SAS Block Off Plates with the addition of a dongle to kill the FI light when the SAS valve is removed, a billet aluminum plug for where the empty hose comes out of the stock airbox and a spring clamp to hold it.
SAS Kit Stage 3 - 89.95
(79.95 if combined with intake purchase - choose option at intake checkout)
The full 'Plug and Play' kit for all KTM Twins. The easiest option to completely remove your SAS and Evap Canister system and stop the FI light from coming on when you remove the SAS valve system completely. The SAS Stage 3 kit contains 2 Rottweiler SAS Block Off Plates with the addition of a dongle to kill the FI light when the SAS valve is removed, a billet aluminum plug for where the empty hose comes out of the stock airbox, a spring clamp to hold it and a genuine Dakar bike 'TYGON' tubing hose kit for the newly needed fuel tank breather lines and a throttle body synchronizing kit with teflon plugs for easy anytime vacuum checks with the pop of your seat.
